TRUIT TR 5214 Bending Tester

TR 5214

cone bending instrument

Compliant with GB/T 11185, ASTM D522 and ISO6860-84 standards, high-quality stainless steel conical mandrel with corresponding scale values for easy reading.

Introduction

The cone bender is a special instrument used to test the bending properties and bending strength of materials. Its main component is the tapered shaft, which is made of high-quality stainless steel, which has good wear resistance and corrosion resistance. The dimensions of the tapered shaft are 3.1 mm diameter at the small end, 38 mm diameter at the large end, and a length of 203 mm.

During the test, a sample of the material to be tested is placed on the cone shaft of the cone bender, and then the sample is bent and deformed by applying force. By measuring the applied force and the deformation of the sample, the flexural properties and flexural strength of the material can be determined. The cone bender is simple and easy to use, and is suitable for bending performance testing of various materials.

The conical bending Tester is designed in accordance with GB/T 11185, ASTM D522 and ISO6860-84 standards, and is used to evaluate the cracking resistance or resistance to bottoming of paints, varnishes or related products when they are bent around a conical axis under standard conditions. The performance of stripping on the material.

Features

• The newly designed clamping device can quickly fix the test board

• Simple and elegant design

• Tapered shaft in high stainless steel

• The instrument has a corresponding scale value for easy reading

Packing list：Host X1, handle X1, certificate X1, manual X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.