Moderner

Gravure ink printing proofer is used for laboratory rapid prepative Gravure ink printing samples, using plane engraving gravure plate direct printing method to work, inspection inks printability.

Used to measure inks drying time, pressurized wheel mass 100g, pressurized wheel traverse speed 2mm/r, test timing (16 gears) 5~ 20h, round drum full ring number 120r, per turn time accuracy +/- 0.025s

Single-channe, range 0~50μm, scale unit μm, scraper material stainless steel, groove size 12.7 * 140mm, scraper material stainless steel, Graduation 2.5μm.

It meets the ISO 877-2 standard and can expose 184 150x70mm standard samples to the sun at a time, with an external size of 3000x1550x1450mm.

Range 0-100; display accuracy 0.1, in line with ISO and GB standards;

It is used to test the performance of Dry-Film of Paints, varnish or related products against cracking or disbonding from the substrate when deformed by heavy hammer impact under standard conditions. Impact height 0~100cm, drop weight mass 1000g, additional mass 1kg/2Lbs, Striker Diameter φ 15.9mm, φ 20mm, die base aperture φ 16.3mm, φ 27mm.

According to the national standard GB1749 "thick paint, putty consistency determination method" designed and manufactured. Used for thick paint or putty consistency determination.

Single-channe Fineness gauge, with a range of 0 to 150 μm, made of stainless steel, is specially used to determine the particle size and dispersion of pigments and impurities in Coatings, paint slurries, inks and other liquids and slurries. The degree of dispersion is expressed by microns or "Hegman"

Load 500g, applicable to standard GB/T 6739-2006, standard 13 hardness pencils.

LCD digital display, without weight, while displaying KU value, GM value and reference mPa.s value (or cP value), for Coating, paints and other viscosity tests.

In line with GB9279, ISO12137 standards; 60W power, needle speed 3cm/s, needle radius 0.5mm, hard steel material; ball bearing, flexible rotation; voltmeter indication.

Double-channel qxd Fineness meter, applicable to standard JJG (chemical) 018-96, GB/T1724, range 0~25μm, Graduation 2.5μm

Single-channe, range 0~100μm, scale unit μm, scraper material stainless steel, groove size 12.7 * 140mm, scraper material stainless steel, scraper size 70mm, Graduation 5μm.

Explosion-proof frequency conversion, Motor power AC 2.2kW, Speed range 0~ 4000rpm, Impeller configuration φ 120mm, lifting stroke 420mm.

Suitable for measuring the specific gravity of various Coatings and auxiliary materials, oils and other liquids. Cup volume 50ml, material stainless steel, applicable to standard GB/T 6750-2007, measurement temperature 23 +/- 0.5 ℃.

Specification 100ml; material stainless steel.

In line with GB5211.19 to measure the relative tinctorial strength and dilution of pigments, the machine Glass grinding disc has high flatness and good preparation effect

QTX film resilience measurement, in line with GB1731 standard, 7 different steel shaft rod, the minimum shaft rod diameter without causing film damage indicates the flexibility of the film.

Meet the standards GB/T 5211-16, GB/T 5211-19, GB/T 21867.1, GB/T 21868.5, ISO 787-16, ISO 787-17, ISO 8780-5, ISO 8781-1, load weight 1.75kg, 1.75kg * 2, 1.75kg * 2 + 2.92.

Wide-channel, range 0~25μm, Graduation 1.25μm, stainless steel, scale unit μm.

A special instrument designed and manufactured according to the provisions of the initial drying crack resistance test in GB9779 "Clad architectural coatings". It mainly uses the determination of the initial drying crack resistance of clad architectural coatings. The instrument uses an axial flow fan to supply air, and the wind speed can be adjusted steplessly.

Large double-channel, range 0~25μm, Graduation 2.5μm, stainless steel, scale unit μm.

Load 1000g, applicable to standard GB/T 6739-1996, standard pencil 6B-6H (13 pcs).

Wide-channel, range 0~25μm, Graduation 2.5μm, scraper corrosion-resistant stainless steel material, scale unit μm and Hegman, suitable for JJG and GBT standards.

Konig pendulum and Persoz pendulum; conforms to GB/T 1730, ISO 1522, ASTM D4366 standards; LCD screen with swing bar positioning and release buttons, and the machine is equipped with horizontal bubbles.

Double Frame Impeller Planetary Stir; Programmable Control, Liquid Crystal Digital Display; Dedicated to the measurement of water absorption of offset plate inks and their connectors; ASTM D4942 standard.

Single-channe, range 0~15μm, scale unit μm, stainless steel, applicable to GB/T 1724, GB/T 13217.3, ISO 1524, ASTM D1210, Graduation 0.75μm.

500G, used for measurement of paints film and other drying surface adhesion, used to judge paints, Coating, inks and other product performance, is a very simple structure of the Backtack Tester, the material is stainless steel.

Used to test the scratch performance of various wood-based panels and veneer wood-based panels, in line with standards GB/T15102, GB/T17657, GB/T18102.

Impact height 1250mm, Impact height 0~100cm, drop weight mass 300g, 1000g, Striker Diameter φ 15.9mm, φ 12.7mm, meet the standards ASTM D2794, ASTM D3029, ASTM D4226, HG chemical industry standards.

1000 ℃, Temperature range RT + 50~950 ℃, heating workpiece imported Cantel resistance wire, furnace material aluminum oxide, furnace volume 1.9L, heating power 2.5KW, furnace size 120 * 200 * 80mm.

Konig pendulum, Konig swing rod mass 200g, Konig swing period 1.4 +/- 0.02s, Konig ball diameter 5mm, Konig flat Glass swing time 250 +/- 10s, Konig flat Glass swing times 172~ 185, Konig start and end swing angle 6 °/3 °.

Swing bar type Persoz pendulum, Persoz ball diameter 8mm, Persoz flat Glass swing time 430 +/- 15s, Persoz flat Glass swing number 430 +/- 15, Persoz starting and ending swing angle 12 °/4 °

Large double-channel, 0~100μm, scale unit μm, Hegman, stainless steel, suitable for standards GB/T 1724, GB/T 13217.3, ISO 1524, ASTM D1210.

Impact height is 0~100cm, drop weight mass 1000g, Striker Diameter is 8 mm, die base aperture is 15 mm, meeting standard GB/T 1732.