Factory

Station 10, weight 1000g, (or specified), Timer 10 groups, 99999.9 hours, Temperature range RT +~ 250 ℃, Temperature display accuracy 0.1 ℃, heating hot air circulation, inner box size 40 × 35 × 45cm.

Absorbent paper weight 200~250g/m2, absorption speed 75mm/10min, used to determine the surface water-absorption of sizing paper and Cardboard including corrugated fibreboard.

Force range of 20kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

Spreader size Max. L200mm * W300mm, substrate Film thickness Max: 5mm, Heating Plate Film thickness 40mm, heating range room temperature -200 ℃, accuracy +/- 2um, viscosity 100-7000mPas, bottom heating range 0-200 ℃, temperature control accuracy +/- 1 ℃.

Stainless steel shell, using control of the size of the scorching current to change the scorching temperature, using the temperature control instrument to accurately control the temperature of the scorching wire, K-type armored Thermocouple for high accuracy, Reliability.

Illuminant 20W fluorescent lamp, irradiation angle of 60 °, can be swirled/spun 360 °, standard dust picture 0.05~ 5.0mm, manufactured according to standard GB/T 1541 "Paper and Cardboard Dust Determination Method", professional for measuring paper surface Dust Determination.

Click and scribe can be tested separately, independent operation, Test speed 0~80 times/minute, using multi-function clamping mode and LED digital display setting counter intuitive control, simple operation.

Cardboard thickness indication accuracy +/- 0.03mm, measurement range 0-20mm, Graduation 0.001mm, the instrument is suitable for paper, Cardboard and Miscellaneous sheet material thickness.

Test load 4.91N, 9.81N, 14.72N; bending angle 135 ° +/- 2 °; sample size 15mm wide, about 250mm long, specially test the bending strength of paper and Cardboard

Measurement range (15~ 10000) mN.m, Precision 50mN or less +/- 0.6mN, remaining +/- 1%, resolution 0.1mN, equipped with 5.7in LCD Linear dispersion diagram, real-time display of stiffness and time Linear dispersion operation is simple and convenient.

The use of high-quality steel plate surface spray, double-decked Glass observation window structure, the box is equipped with controllable lighting, using high-precision microcomputer temperature control instrument, with fast Response, small overshoot, high accuracy, use the touch button to set parameters, easy to operate.

Test station 1 station, Test speed 5~ 30 times/min, SMC cylinder, high elastic rubber indenter.

Density resolution 0.001 g/cm3, maximum weight 600g, minimum weight 0.005g, Measurement range 0.001 - 99.999g/cm3, equipped with integrally formed aluminum alloy measurement table and transparent sink.

Manual model, the size of the countertop is 1200 * 1200mm, the countertop is made of high-quality lame plating steel plate material, the angle range is 0-30 °, and the bearing capacity is 80kg.

Design standards: TAPPI-T409, JIS-P8113; precision blade combination, so that the edge of the sample can be flat.

Inner and outer box material stainless steel #304, temperature range -30 ℃ + 100 ℃, with protection device thermal protection shutdown, leakage protection shutdown, over-temperature protection, overload protection and other functions.

The equipment adopts double comma drawdown blade Spreader head and bath design, Spreader wet thickness range of 0.1~ 3mm, drying temperature up to 250 ℃, integrated three independent temperature zone drying system, to achieve full automation process.

The electrode cross-sectional area is 2mm × 5mm two rectangular platinum electrodes, one end edge is 30 ° inclined surface, the test Voltage is 100~600V, the dripping time interval can be set arbitrarily, in line with GB/T4207 test standard.

Manual operation, XY stroke 400x300mm, 460 × 360mm Glass table, digital measurement, all marble structure, with adjustable LED annular surface Light source.

Adopt thermogravimetric principle, maximum weighing 50g, weighing readability 0.005g, moisture readability 0.02%, Temperature range set 50 ℃ -160 ℃, support a variety of data display (such as time, real-time temperature, moisture, Solid content, etc.)

Liner stainless steel, size 450x300x190mm, Temperature range + 5 ℃~ 65 ℃, Temperature resolution 0.1 ℃, Sensors fault and over-temperature alarm function, support timing.

Control system adopts full digital control Frequency AC motor to ensure high transmission efficiency, smooth transmission, low noise, speed accuracy can be controlled within +/- 0.5%, the product performance is stable and reliable, Measuring accuracy is high, testing software is powerful, easy to understand.

The diameter of the countertop is 600mm, and the countertop is made of high-quality lame plating steel plate material, with an angle range of 0-30 ° and a bearing capacity of 50kg.

With unwinding, scraping, drying, overlaying, winding functions, with 2 1-meter oven, high-precision servo motor, with slot-die Spreader device, application width 400mm.

Volume 150L, temperature range -20~50 ℃, Temperature Fluctuation +/- 1.5 ℃, Biochemical Incubator controller, with RS485 communication, temperature adaptive control, automatic determination of compressor on and off temperature point, high accuracy, high temperature without overshoot.

Suitable for Rubber, sole, PU and other materials of right-angle bending test, the test piece by the machine after continuous expansion, bending, check its attenuation, damage and checking degree.

Automatic control automatic ignition, used for battery flame resistance test, using liquefied gas/methane gas, test hole surface diameter 102mm, in line with UL1642, SJ/T11170 and other test methods.

Tension gauge 30kg, in line with 16CFR, 1500.51-53, ASTM WK4510 PS79-96, ASTMF963, EN71-Part, M & S P115A standards, can detect clothing, toys and footwear after the installation of Accessories adhesion strength, loosening caused sharp edge, sharp angle and other mechanical damage.

Zigzag angle (5 ° to 80 °) adjustable., Zigzag resistance rate 5 to 150) r/min adjustable (digital display), can test 4 finished shoes at the same time.

Impedance steel ball test method, total weight 135 +/- 5g, test displacement 30 +/- 1 °, automatic detection of penetration and shutdown, in line with ASTM-D2099 standard.

Manual operation, XY stroke 500x400mm, 560 × 460mm Glass table, digital measurement, all marble construction, with adjustable LED annular surface Light source.

The parallelism of both sides of the sampling is less than or equal to 0.015mm, the crease stiffness sampling size is 36 * 38mm, and the sampling thickness ranges from 0.1 to 1.2mm.

In line with the SAMSONITE standard, the test piece will automatically stop when it falls in the middle of the transportation function, and the Test speed can be adjusted from 0-5km/h, which is suitable for luggage or travel bags with wheels.

Contact angle measurement range 0 ° -180 °, contact angle measurement accuracy +/- 0.1 °, injection system moves up and down 35mm, left and right 35mm, test sample table size is about 200mm × 125mm, Microscope moves up and down 80mm (fine-tuning 3mm), injection system Manual injection system (knob type)

Measurement range (1-99999) s, with thermal printer, High Reliability and Stability to ensure accuracy and conformity of measurement results.

Positive pressure, pressure value range 0-400KPa, using the internal and external pressure difference to observe the gas escape of the test sample, so as to determine the sealing performance, one-button operation design can automatically complete the test, end the test and pressure relief.

Speed 0-5m/min, guide roller surface width 300mm, oven length 0.5m, effective application width 100~300mm, Spreader scraping, Coating thickness 0-3000um adjustable, Temperature control accuracy +/- 2 ℃, infrared heating, hot air circulation system circulating duct single layer.

Suitable for medium and high viscosity materials, using frequency control 0~1440 rpm and bottom open turbine structure, with chilled down jacket to control temperature, to achieve efficient wet grinding and dispersion.