Circular Adhesion Tester

Manual Circle-drawing method paint film adhesion tester, tracing diameter 0~ 10.5mm, rotating needle 35 brand stylus 50, working stroke ≥ 80mm, no-load pressure 200g, weight weight 100g, 500g, 200g, 200g, meet GB/T 1720 standard.

Used to determine the adhesion ability of various films to the surface of the coating. Tracing diameter 0~ 10.5mm, working stroke ≥ 80mm

Draw the diameter of the graphics, working stroke ≥ 80mm, weight weight 100g, 500g, 200g, 200g, the effective area of the table is 100 * 50mm, the rotary needle adopts 808 grade singing needle, which can be easily replaced, and can be used less than 5 times.

Electric scribing track method for adhesion, by scribing track method for determination of paint film adhesion performance test technical characteristics, according to seven grades to evaluate the adhesion of the film to the substrate firmly, according to GB/T1720 standard.

Driven by the motor, the film adhesion is measured by the circular trace method, which conforms to GB/T1720 and JISK6894 standards. The motor speed is 80r/min, the working stroke is 80mm, and the weight weight is adjustable (100~ 1000g)

Used to test the film and substrate adhesion ability, in line with the standard GB/T 1720 standard, electric complete Circle-drawing, uniform speed, constant strength, to ensure a high degree of test results Repeatability and comparability.

Manual circling method, drawing diameter 0~ 10.5mm, working stroke ≥ 80mm, there are three weights of 500g, 200g and 100g.

Circle method, drawing pattern diameter 0~ 10.5mm, table effective area of 50 * 100mm, effective stroke is not less than 80mm, measuring the adhesion ability of various films to the surface of the coated material.

Manual, drawing diameter 0~ 10.5mm, working stroke 80mm, weight weight 100~ 1000g, tracing pitch 1.5mm, Dimension 330 * 160 * 220mm, in line with the standard GB/T1720, JISK6894.

Electric, weight weight 0~ 2000g, Dimension 180 * 230 * 280mm, Motor Rotation speed 20~ 40mm/s, minimum increment 50g, top bar lower end tilt angle 10-5 °.