Tensile Machine

Range 1000KG, Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Force range of 10kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Capacity 0~3kg, accuracy level 0.5, force range 0.02/100 -100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Measurement accuracy +/- 0.1N, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Adopt ball screw drive and high-end stepper motor, equipped with large screen touch display, real-time display of test data, and support printing tensile strength, elongation and other results. Built-in micro-printer, with automatic reset, data memory and overload protection functions.

Capacity 0~300kg, accuracy level 0.5, force range 0.02/100 -100%, using imported electrical components, with peak holding, sample breaking stop function, support stepless speed regulation.

Force measuring range of 50kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Maximum test force 5000N, test force level 1, test force Measurement range 2% --100% FS, beam displacement Measurement accuracy resolution higher than 0.01mm, Test speed range 0.1-500mm/min, stepless speed regulation.

Measurement accuracy +/- 0.01N, built-in micro-printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Maximum test force 5000N, accuracy class 0.5, test force Measurement range 1%~ 100% FS (full scale), deformation Measurement range 0.2%~ 100% FS, deformation error of indication indication within +/- 0.5%.

Measurement accuracy +/- 0.1N, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Measurement accuracy +/- 0.01N, effective stroke 700mm, built-in micro printer, resolution 1/200000, used for static load, tensile, compression, bending, shearing, tearing, disbonding and other mechanical properties test.

Suitable for tensile, disbonding, tearing and heat sealing strength testing of Plastic film, composite film and other materials. LCD real-time display, touch key operation, support Linear dispersion analysis and various test modes. With closed-loop control, peak hold, overload protection functions, speed range 1-500mm/min

Range 50N, load Graduation 0.001N, Test space 220mm, 7-inch touch screen, four test modes, with its own micro printer, in line with JB/T7796-2017 standard.

The force range is 10~500N, and the test stroke is 350mm, which can measure tensile compression, bending disbonding, displacement, tearing, insertion force, tensile damage force and other tests.

Measurement accuracy +/- 1%, resolution 1/200000, can be used for tensile strength, peeling strength, deformation rate, breaking force, disbonding force, opening force and other performance tests.

Stroke 1000mm, touch key Operation mode, using CHINA Sensors, Tester level 1, test force accuracy is better than +/- 1%, test force 1000N.

The pointer push-pull force meter is used to display the force value with the pointer scale and then observe and read it. The force value measurement range is 10~500N, and the effective stroke is 350mm.

Range 500N, load Graduation 0.01N, 7-inch touch screen, high-precision, high resolution, high Stability, in line with JB/T7796-2017 standard, with its own micro printer.

Touch LCD, adopt high-precision system, with digital display of test force, which can realize the adjustment of the speed of the beam when the sample is clamped. The test force Precision is better than +/- 1%, and the test stroke is 600mm.

Maximum test force 5000N, accuracy class 0.5, Measurement range 1%~ 100% FS (full scale), Measurement range 0.2%~ 100% FS, Displacement resolution 0.01mm.

Capacity selection 500kg, force measurement Precision +/- 0.5%, force measurement resolution 1/300000, effective force measurement range 1~ 100% F.S, deformation indication Precision +/- 0.5%, Test speed range 50~300mm/min (can be arbitrarily set), test maximum stroke effective 500mm, effective Test space left and right 380mm, front and rear < unk >