LinShang

For measurement of UVC sterilization lamp irradiation intensity, in line with the "WST 367-2012 institutional disinfection technical specification" standard, with 1 meter test hook, Light spectrum Response 230nm-280nm, Power Measurement range 0 - 20000μW/cm ².

C-type Impact device, measurement accuracy +/- 12HL, Bluetooth connection to mobile app, built-in orientation Sensors, support Bluetooth connection to thermal printer, QC mode and statistical mode two measurement modes.

The resolution is up to 0.01mm. The thickness measurement range is 0.8~ 350mm. Measurement, automatic shutdown, aviation aluminum connection port, support QC detection and statistics mode, and adjust the sound speed in 3 ways.

DL type impact device, suitable for small space Hardness value measurement, probe built-in Direction Sensors, full angle measurement without error, a variety of measurement materials can be switched

DL type Impact device, measurement accuracy +/- 12HL, Bluetooth connection to mobile app, probe built-in direction Sensors, support Bluetooth connection to thermal printer, QC mode and statistical mode two measurement modes.

Specializing in high pressure mercury lamps, halogen lamps and other light sources for ultraviolet energy measurement, disc design, thin body, high temperature design, can run normally in a high temperature environment for a long time.

Hardness Twin Coil technology for testing surface hardening and parts with small mass or Film thickness, providing good measurement accuracy and repeatability. The probe has built-in Direction Sensors for full angle measurement

D-type Impact device, measurement accuracy +/- 12 HL, Bluetooth connection to mobile app, built-in orientation Sensors, support Bluetooth connection to thermal printer, QC mode and statistical mode two measurement modes.

Thickness measurement range 0.8~ 600mm, over-Measurement, automatic shutdown, aviation aluminum connection port, support QC detection and statistical mode, 3 ways to adjust the speed of sound.

Power measurement range 0~2000 mW/cm2, power resolution 0.01 mW/cm2, power data storage interval 32 times/second, energy measurement range 0~999999mJ/cm2, temperature measurement range -55 ° C~ + 125 ° C, temperature data storage interval 2 times/second

DC type Impact device, measurement accuracy +/- 12 HL, Bluetooth connection to mobile app, built-in directional Sensors, support Bluetooth connection to thermal printer, QC mode and statistical mode two measurement modes.

Resolution 0.1HWA, measurement accuracy +/- 0.5HWA, repeability 0.5HWA, film thickness 0.6mm-8mm, inner diameter of tested material > 10mm, display 128 * 64 point array OLED, operation temperature range -10~50 ℃, 0~85% RH (no condensation)

1Mm measurement aperture, very suitable for measurement of small and fine objects or areas, split design, probe can be inverted, measurement is more convenient 3.5 inches large touch screen, simple operation, there are multiple Color parameters and color difference formula optional, standard deviation Delta E * ab ≤ 0.03, in line with the national first-class metrology standards.

Simultaneous measurement of infrared, ultraviolet blocking and visible light transmittance, using peak wavelength 365nm ultraviolet, 940nm infrared, accuracy better than +/- 2%, support data locking and Automatic calibration, lightweight and portable only 70 grams.

Support 1 million cd/m ² ultra-high luminance measurement, equipped with 10mm and 20mm replaceable probes, Light spectrum Response is consistent with V (lambda) function, with stroboscopic measurement and Light spectrum Linear dispersion analysis function, built-in storage 9 sets of data.

Simultaneous measurement of infrared, ultraviolet and visible parameters with a resolution of 0.1% and an accuracy better than +/- 2%. Adopt real-time dynamic calibrating technology, equipped with data locking function, and support automatic swirl/spin display interface.

Support ultraviolet, visible light and three infrared band test, can measure the total solar barrier rate and transmittance, using point array color screen progress bar display, the fuselage is only 70 grams lightweight and portable, the accuracy is better than +/- 2%, with real-time Adjustment.

Light spectrum LED Light source and Light spectrum Sensors, light transmitance Repeatability ≤ 0.03, providing 5mm and 14mm measurement aperture, support horizontal or vertical placement, adapt to a variety of test scenarios.

Touch screen operation, measurement diameter is 8mm, using 45 °/0 ° Optical inspection geometry, integrated multiple Color Charts, can quickly match the three color chip numbers close to the sample color, with QC detection function.

3.5-Inch lPS color screen plus capacitive touch screen, built-in multiple standard electronic color chips, support connecting to mobile APP, with PC software, ready to use, support personal Color library import and export, built-in compensation light path.

In line with the national first-class standard, it provides professional Light spectrum reflectance Linear dispersion, a variety of Color space and color difference formula to choose from, and can measure whiteness, yellowness and other Color parameters.

3.5-Inch color capacitive touch screen, built-in multiple standard electronic color chips, measurement diameter Φ8mm, D65 measurement light source, support for personal Color library import and export, built-in compensation light path.

3.5-Inch color capacitive touch screen, measurement diameter 8mm, measurement condition light source D65, field of view 10 °, QC rapid detection, Bluetooth connection to mobile APP and USB connection to computer software, built-in multiple standard electronic color chips.

20mm large measurement aperture, suitable for texture or surface rough object detection, 3.5-inch IPS color capacitive large touch screen, 1 second to measure Color value, can be connected to mobile APP or PC software.

Equipped with advanced Light spectrum Sensors, it can display professional Light spectrum reflectance Linear dispersion, which can be used with APP, realize Color sharing on APP, and give PC software to realize data import and export.

APP intelligent Colorimeter, with color difference comparison, Color acquisition, QC detection and other functions, suitable for general paint film or printing surface Gloss detection, measurement diameter is 8mm, full Light spectrum LED Light source Light source.

Measuring 5mm thick material, magnetic/eddy current dual-purpose, digital probe technology, automatic temperature compensation, over-Measurement, no need to calibrate, wear-resistant ruby probe.

Ruby probe probe, built-in integrated, thickness measurement range 0.0μm-2000μm, minimum measurement area φ = 25mm, can automatically identify iron powder putty, and there are beeps and red warning prompts.