Bending Tester

Paints and varnish film flexibility, in line with GB6742, ISO1519, ASTMD522, DIN53152 standards, suitable for 1.0mm thickness of the sample.

According to GB/T1 2754-91 standard design, the test bending angle is less than 45 degrees, which is suitable for testing the bending test of color steel plates and steel strips and other coatings.

QTY-32 cylindrical mandrel bending Tester evaluates the flexibility of paint film, with shaft rod diameter 2, 3, 4, 5, 6, 8, 12, 16, 20, 25, 32mm, in line with standards GB/T6742-86, ISO1519-73, ASTMD522, DIN53152

Paints varnishes bending cracking test, 12 different specifications bushing test different bending state film from the substrate flaking performance, in line with GB/T 7642, ISO 1519 standards.

Designed and manufactured according to the requirements of the manufacturer of color steel plate and Aluminum Panel for testing the flexibility T-Bend performance of color steel plate and Aluminum Panel. The equipment meets the requirements of NCCA "Standard" "T" Bend Test Method ".

In line with GB/T12754 standard, the first bending angle is < 45 °, the thickness of the test sample: 0.5~ 1.0mm, and the stroke of the flattening mechanism is ≥ 10mm.

Cylinder mandrel bending test; standard 13 different diameters of the shaft bar; test plate substrate thickness requirements ≤ 1.0mm; in line with GB/T6742, ISO1519, ASTM/D522, DIN 53152 standards.

Anodic oxidation aluminum material; containing 12 stainless steel shaft rods; shaft bending test; in line with GB/T6740, ISO1519 standards.

Designed to measure the flexibility and T-Bend performance of Color plate coatings, the device meets the requirements of the NCCA Standard "T" Bend Test Method. The device is suitable for 0.2 to 1.5mm thick steel plates and Aluminum Panels to ensure accurate flexibility testing