AISRY

Swing angle 45 ° 60 ° 90 ° 180 ° adjustable, swing speed 10-60c.p.m. adjustable, 6 automatic counters, counting separately, power failure memory function.

It is used for the flexure test of the circuit board with flexure resistance, 1 test station, 10~180 degree test angle, touch screen operation, and manual adjustment of the test stroke of 45~ 100mm.

At the same time, 2 mobile phones are dropped, the test load is 2kg, the drop height is 60~150mm, the drop surface is aluminum material, the Film thickness is 12mm, and the baffle at the drop is reset; the number of buttons can be set to set the value, and the test can be automatically stopped.

500mm test space, microcomputer control, four-column structure, in line with GB/T2166.1 standard, the amplitude is 30 ± 2mm, and the number of fatigue tests can be freely set.

Force measuring range of 5kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, specimen breakpoint sensing.

It has 6 test stations, the test angle is 0~ ± 180 °, the test speed is 5-60 times/min (knob speed regulation, LCD display), and it is equipped with six groups of anti-skid, which is not easy to damage the special fixture of the sample.

Without turntable, Light source UV300W bulb, Heating mode is hot air circulation, RT +~ 200 ℃ temperature range, control accuracy +/- 3 ℃, can do two tests: aging and yellowing resistance.

The force value range is 0~2T, the pressure plate size is 1000 * 1000mm, the test speed is 5mm~ 100mm/min, and the speed can be input arbitrarily. It has overload stop, emergency stop button, automatic stop when the specimen is damaged, and automatic stop protection when the upper and lower limits are set.

Used for battery flame resistance test, nozzle inner diameter 9.5mm, length about 100mm, automatic control automatic ignition, in line with UL1642, SJ/T11170 and other test methods.

In line with GB and QC standards, the maximum stroke is 1000mm, the impact height is 610mm, the accuracy is ± 0.1, and the resolution is 1/100.

The friction speed is 30CPM, the sample size is 22 * 3cm, the number of friction groups is 6set, the friction fastness level of dyeing is evaluated, and it has the function of power-off memory.

Computer automatic control stroke, XY stroke 500x400mm, 560 × 460mm Glass table, digital measurement, all marble structure, with adjustable LED ring surface Light source.

3 sets of rollers, roller load 2000g ± 5g, Film thickness of about 6mm, used for adhesive tape flkn strength, tack and other test specimens prepared.

Comply with ISO, GB, ASTM standards, can be used for film, sheet, coil, Paper Cardboard and other tear resistance testing;

The content of ozone in the atmosphere is very small is the main factor of rubber checking, this product simulates and strengthens the ozone conditions in the atmosphere, studies the effect of ozone on rubber, and quickly identifies and evaluates the anti-ozone aging performance of rubber and the protective effect of anti-ozone agents.

The diameter of the scraping needle is 0.45mm, the material meets the requirements of GB/T4358, the scraping speed is adjustable from 10 to 60 times/minute (one back and forth movement is one time), and it has a self-determined stop function. When the scraping needle wears through the insulation and contacts the conductor, this opportunity will automatically stop.

Measuring range 15~ 10000mN.m, bending speed 200 ° ± 20 °/min, suitable for measuring the bending resistance of Paper, Cardboard and other sheet-like non-metallic materials with Film thickness less than 2mm, in line with the relevant provisions of IS02493 and GBT2679.3.

This machine is used to test the cold resistance of finished shoes, rubber, plastic, soles, synthetic leather, etc. to understand the material or finished product adaptation to low temperature climate or cold areas. This machine is made of stainless steel. It can be equipped with various resistant fixtures to meet different requirements.

The number of tests is 0-99999999 times, and the test speed is 0-80 times/min. It adopts multi-function clamping method and LED digital display setting counter for intuitive control, and the operation is simple.

It is suitable for measuring the water absorption of various paper or Cardboard surfaces, the test area is (100 ± 0.2) cm ², the weight of absorbent paper is 200~250g/m ², and the absorption speed is 75mm/min.

Force range of 200kg, measurement accuracy +/- 1%, force units kgf, gf, N, kN, lbf, stress units MPa, kPa, kgf/cm2, lbf/in2, with upper and lower limit safety settings, test breakpoint sensing.

Manual operation, XY stroke 200x100mm, 270x160mm Glass table, digital measurement, all marble construction, with adjustable LED annular surface Light source.

0 °, 45 °, 90 ° multi-angle drop device, drop height 300~2000mm, test load 2kg, vacuum adsorption drop, drop height can be set, automatic lift, accurate impact site, with acceleration, speed measurement and other functions.

High configuration, can measure tensile rate, flkn force, tensile force, tensile strength, opening force, etc., with Measurement certificate, ± 1% accuracy, 1/200000 resolution.

Manual operation, XY stroke 400x300mm, 460 × 360mm Glass table, digital measurement, all marble structure, with adjustable LED annular surface Light source.

The diameter of the countertop is 1000mm, the countertop is made of high-quality lame plating steel plate material, the angle range is 0-30 °, and the bearing capacity is 120kg.

Light source 20w fluorescent lamp, irradiation angle 60 °, swirl/spin table 270mm × 270mm, effective area is 0.0625m2, swirl/spin 360 °, standard dust picture 0.05~ 5.0 (mm2), accuracy 0.1 seconds

Inner and outer box material stainless steel #304, temperature range -30 ℃ + 100 ℃, with protection device thermal protection shutdown, leakage protection shutdown, over-temperature protection, overload protection and other functions.

Computer automatic control stroke, XY stroke 400x300mm, 460 × 360mm Glass table, all marble structure, with adjustable LED ring surface Light source.