IMT

Measure the performance of the Paper Cardboard in absorbing Printing ink in the specified time area. The ink wiping speed is 15.5 ± 1.0cm/min, the opening area of the ink-coated platen is 20 ± 0.4cm ², the film thickness of the ink-coated platen is 0.1 ± 0.02mm, and the ink absorption time is 120 ± 5s. Automatic control

Interlayer bond strength Tester is used to detect the bonding strength between Paper and Cardboard layers (between Paper layers, within Paper). The interlayer bonding strength can be used to detect Paper composites, thin film composites, etc. at the same time. Internal bonding strength of sheet materials.

Touch screen control, automatic positioning, pneumatic pressing, standard with a layer version of 20~45μm, color bar size 65X45mm/P, screen size ø110X200mm, proofing effective area 110 * 160mm, equipped with transmission cleaning device.

Used for Printing ink spot color proofing, printing material size 290 × 250mm, manually adjust the width of the uniform ink, the width of the color bar is 40mm, fixed Printing ink transfer, one-time uniform ink transfer, full width ink extraction.

Dropper drop ink, proofing material thickness 0.01-2 mm, proofing material size 150x520mm, printing area 100x520mm, suitable for inks flexographic water-based, UV ink, lithography, letterpress plate ordinary or UV ink.

Separate and directly transfer inks, use spring pressure to even ink, support inks Spot Color proofing, inks transfer rate, calculation of ink layer thickness, color bar width is 25mm, 35mm, 50mm, mid-section ink extraction.

Range 0~1, resolution 0.001N, built-in R232 interface can be connected to the computer, LCD large screen display Linear dispersion analysis chart, standard weight and Paper Cutter.

Adopt +/- 0.1% high-precision Sensors, support 0.01~ 5.0mm thickness material detection, with 60mm~ 5mm multi-speed bending length adjustment, 7-inch touchscreen Operating interface, can achieve self-calibrating and nondestructive continuous clamping.

IMT-VL01 laboratory with wali Freeness Tester for a variety of plant fiber, synthetic fiber, carbon fiber, fiberglass beating test, the use of laboratory beating wali (Valley) Freeness Tester method, can change the heavy thallium pressure, beating time, and automatically control the beating time, so as to obtain different experimental results.