LinShang

Magnetic induction, split probe, range 0-500um, error range ± (2% of reading + 0.3um); minimum matrix Film thickness 0.1mm; data statistics function; zero and multi-point calibrating; measurable small size/special-shaped material.

Reaction time 0.5s; Aluminum dual function; OverMeasurement; Integrated probe; Range 0-2000um; Error range ± (3% + 2um of reading); Minimum matrix Film thickness Fe0.2mm/NFe0.05mm.

Reaction time 0.5s; Aluminum dual function; Measurement; Split probe; Range 0-2000um; Error range ± (3% + 2um of reading); Minimum matrix Film thickness Fe0.2mm/NFe0.05mm.

Eddy Current, split probe, range 0-1500um, error range +/- (2% of reading + 0.3um); minimum substrate thickness 0.05mm; data statistics function; zero and multi-point calibrated; measurable small size/profiled material.

Eddy Current, split probe, range 0-1500um, error range +/- (2% of reading + 0.3um); minimum substrate thickness 0.05mm; data statistics function; zero and multi-point calibrate; with test fixture Repeatability up to 0.1um; can measure small size/special-shaped materials.

Magnetic induction, split probe, range 0-500um, error range ± (2% of reading + 0.3um); Minimum matrix Film thickness 0.1mm; Equipped with test fixture, the repeability can reach 0.1um; Small size/special-shaped material can be measured.

Coating Thickness Gauge host, support zero adjustment and multi-point calibrating, with temperature compensation function, with data statistics function, need to buy another probe, can be matched with rack test.

Measurement range 0.0-3500 μm, Measurement accuracy ≤ +/- ( 3% H + 2 μm), the use of hard wear-resistant ruby probe to reduce measurement errors, digital signal processing is completed directly on the probe to ensure data stability throughout the measurement process.

Using ruby probe and three-color backlight prompt, 0.3 seconds fast measurement, the range of 5000 μm, can intelligently identify the iron powder putty layer and support continuous Measurement mode.

Measurement accuracy up to 2% H + 1μm, support continuous measurement function, 0.1 second fast data acquisition, built-in memory chip can save 9 sets of data, minimum matrix thickness Fe: 0.2mm/NFe: 0.05mm.

It can measure the thickness in a low temperature environment at minus 40 ℃, the thickness measurement range is 0.0-2000 μm, the built-in integrated dual-function probe has an error range of +/- 3%, and has the function of temperature compensation and digitalization of analog signal terminals.

Glass thickness measurement using laser reflection principle, such as single-layer Glass, hollow interlayer Glass, cylindrical glass tube, thickness range 70mm, air interlayer 34mm.

Using three-in-one optical path design, one hole can be measured 550nm visible light and 850nm/940nm infrared transmittance, the minimum test aperture is 1mm, and it is equipped with alignment indicator LED auxiliary alignment.

Illumination measurement, Color temperature, UV index and other parameters multiparameter measurement, widely used 1 million lx ultra-large range design, suitable for human eye spectrum Light spectrum Sensors, more accurate measurement accuracy, can be Measurement

D/DC/DL/C type Impact device, measurement accuracy +/- 12HL, Bluetooth connection mobile app, built-in directional Sensors, support Bluetooth connection thermal printer, QC mode and statistical mode two measurement modes.

Light hole 2mm; accuracy up to +/- 1 %/ +/- 2%; can be tested by Measurement Institute; suitable for X-ray film, aluminized film, milky white, mist and other diffuse transmission material testing; can display light transmitance value and light density value.

Suitable for 365nm/375nm/385nm/395nm and other UV, LED UV light source measurement, disc design, thin body, high temperature design, can run normally in high temperature environment for a long time.

Can compare haze, light transmitance, color difference and other parameters, while supporting ASTM and ISO standard 7 inch large touch screen, simple operation, dual aperture design, small size material can also be measured and repeability is good, can be Measurement

DC type impact device, using dual coil technology, more accurate measurement, probe built-in direction Sensors, full angle measurement without error, ten measurement materials can be switched

Suitable for high pressure mercury lamp and halogen lamp detection; can measure energy/intensity/humidity at the same time, display power Linear dispersion; can be connected to a computer; built-in timer

Using three-in-one optical path design, it can simultaneously measure 430nm blue light, 395nm purple light and 380-760nm visible light transmittance, the test aperture is φ 1mm, with real-time dynamic self-Adjustment, small size and convenient operation.

Hardness of various metal materials such as iron, copper and steel can be measured. Dual coil technology provides good measurement accuracy and repeatability. The probe has built-in directional Sensors for full angle measurement.

The LINSHANG LS123 UV Power Meter can measure the UV intensity in the 260nm-380nm band, and automatically convert the UV barrier rate. It is suitable for UV performance testing of architectural films and solar films.

Thickness measurement range 0.8~ 350mm, over Measurement, automatic shutdown, aviation aluminum connection port, support QC detection and statistical mode, 3 ways to adjust the speed of sound.

LS126C UV irradiometer, specializing in UVC ultraviolet germicidal lamp intensity detection, dedicated to 254nm germicidal lamp detection, mobile APP can realize unattended monitoring

Minimum test hole size 0.5mm, supports 550nm visible light and 850nm/940nm infrared transmittance measurement, with real-time dynamic self-Adjustment, Automatic calibration to 100% transmittance when powered on.

LS301 thermal insulation film Tester, a Temperature Test Chamber that intuitively compares and demonstrates the thermal insulation rate of materials, the instrument directly tests the thermal insulation rate of materials, and the temperature comparison test intuitively reflects the thermal insulation performance of different materials.

It can measure iron, copper, steel and other metal materials. It adopts advanced digital probe technology for accurate testing. The probe has built-in directional Sensors to automatically compensate for measurement errors in different impact directions. A variety of Hardness standards are automatically switched, eliminating the tediousness of manual table checking.

The LS300 thermal insulation film temperature Tester can directly sense the temperature resistance with or without thermal insulation film barrier with both hands, and display the real-time temperature value and the rising temperature difference during the test process.

Simultaneous measurement of multi-layer coatings or coatings + substrate thickness, Large Measurement range, measurement waveform display, three Speed of sound settings.

The parallel light path design can be used for the measurement of thicker materials; the three Light sources share a test hole, and the 380nm-760nm visible light transmitance, 940nm infrared and 365nm ultraviolet transmittance can be obtained in one measurement.