Ipre

Sensors with adjustable gain 40 to 106dB; bandwidth +/- 2kHz to -6dB; Center Frequency: 40kHz +/- 1kHz; Mixer 30 to 50kHz Adjustable Frequency.

Temperature range -20 ℃~ 400 ℃, accuracy +/- 2 ℃ or +/- 2%, Detector resolution 160 x 120, Response band 8-14 μm.

Hardness testing range 8~ 2900HV, minimum test unit 0.031μm, test Microscope magnification 400X, large LCD display (7 inches), suitable for the measurement of micro-Vickers and Knoop hardness of brittle materials such as small and thin specimens.

The hardness testing range is 8~ 2900HV, the minimum test unit is 0.5μm, and the test Microscope magnification is 400X. It is a commonly used hardness testing instrument for R & D institutions, Universities & colleges, production enterprises and testing institutions to conduct research and testing.

The maximum impact energy is 300J/150J, the pendulum pre-lift angle is 150 °, and the impact speed is 5.2m/s. It is installed and fixed with screws, easy to replace, equipped with safety protection pins, and equipped with safety nets.

Test force 60kgf (588N) 100kgf (980N) 150kgf (1471N), hardness testing range HRA: 20-88; HRB: 20-100; HRC: 20-70, hardness resolution 0.1HR.

Field of view: 120 °, depth of field (DOF): 5mm~ 100mm, 360 ° all-round head swing, rear high-power LED fiber conduction, video AVI format, support language Chinese, English and other 7 languages.

The maximum test force is 100KN, and the measuring range is 2% to 100% (or 1% to 100%). It is widely used in metallurgy, mass testing centers, Universities & colleges, industrial supplies, automobile/railway/shipbuilding, aviation manufacturing and other industries.

Integrated measurement with a high-precision grating system, ground-level guides and non-contact linear motors enables efficient and accurate measurement and analysis of surface roughness and contours.

Wider test force range to choose from, with 10-level test force, closed-loop Sensors loading, Electronic Control system, dynamic force fluctuation less than 1/1000 test results are more accurate.

The maximum test force is 300KN, and the measuring force range is 2% to 100% (or 1% to 100%). It is widely used in metallurgy, mass testing centers, Universities & colleges, industrial supplies, automobile/railway/shipbuilding, aviation manufacturing and other industries.

The maximum test force is 20KN, and the force measurement range reaches 2% -100% of the maximum test force. Used for the measurement of tensile, compression, bending, shear, disbonding low cycle fatigue and other experiments of various materials.