mitech

6000Mm large range to meet a variety of detection needs, equipped with high-performance lithium battery can work continuously for more than 10 hours, support full digital true color display and a variety of probe adaptation, suitable for harsh Operating Conditions environment

It can detect defects under the surface of the 0.5-3 mm workpiece, equipped with four probes to adapt to different shapes of workpieces, the detection sensitivity is up to 0.1 micron, and the lifting force is not less than 5kg.

Portable integrated design (AC magnetization power supply has a built-in magnetic yoke, integrating magnetic detection/power supply/lighting functions), large-capacity lithium batteries can be disassembled and assembled independently, and 5 hours of long standby (support no power supply in the field and high-altitude work)

Detection efficiency 0.0-6 m/s (relative speed of Sensors and wire rope), optimal detection efficiency 0.3-1.5 m/s, allowable gap 0-15mm (allowable gap between guide sleeve and wire rope), optimal gap 2-6 mm, qualitative accuracy of broken wire 99.99%

Large-capacity lithium battery (18V/6400mAh), continuous work > 4 hours, 3.5-inch smart color screen real-time monitoring, fluorescent/white light dual-use lighting (illumination > 1000lx), electromagnetic yoke pole distance 75-180mm/lifting force > 45N, host 0.8kg portable body (100 × 200 × 35mm)

Equipped with 400MHz ARM M4 processor, with intelligent analysis and B-scan function, detection range of 0-10000mm, frequency band 0.2-20 MHz, super long standby more than 8.5 hours, support 10 hours of continuous video recording and 20,000 data storage.

Portable integrated design (AC magnetization power supply has a built-in magnetic yoke, integrating magnetic detection/power supply/lighting functions), large-capacity lithium batteries can be disassembled and assembled independently, and 5 hours of long standby (support no power supply in the field and high-altitude work)

AC and DC dual power supply mode, with 0-230mm adjustable yoke spacing and 216N strong magnetization ability, with A1 test piece 15/50 notch high sensitivity detection, can accurately identify the surface crazing defects of ferromagnetic materials, in line with JB/T7411-2012 industry standard.

0-6000Mm large range, can accurately detect defects such as crazing, pores, high Sensitivity, strong penetration, ultrasonic technology to ensure accurate and reliable detection, support 10 hours of continuous work, and have IP64 Protection level.

Using a 200MHz high-speed processor, it can accurately identify minor internal defects in 0-6000mm metals, support multi-language, set industry standards, automatically generate reports, support video playback (≥ 2 hours), and visually display welds.

Detection range 0-5mm, 4 channels can be extended to 8, 10Hz-16MHz wide frequency range/1KHz step adjustment, crazing detection accuracy 3mm × 0.1mm × 0.1mm (steel test block), pipe detection 0.3mm through hole up to 8db (copper pipe)

Equipped with 400MHz ARM M4 processor, supports intelligent defect analysis, Automatic calibration and DAC/AVG Linear dispersion generation, detection range 0-9999mm, fine waveform display, clear defect identification.

Battery and yoke integration can be replaced independently, intelligent identification magnetization (contact workpiece automatic magnetization, leave stop), fluorescent white light can be switched and strong illumination, yoke spacing adjustable, probe foot adjustment is convenient, lifting force and sensitivity are not affected by electricity, full power continuous work for more than 5 hours

Detection range 0-5mm, 2 channels can be extended to 8, 10Hz-16MHz wide frequency range/1KHz step adjustment, crazing detection accuracy 3mm × 0.1mm × 0.1mm (steel test block), pipe detection 0.3mm through hole up to 8db (copper pipe)

Standard cross-type magnetic yoke probe with four-legged rollers can continuously multi-directional labor-saving flaw detection, electromagnetic yoke built-in adjustable luminance and white fluorescent optional LED lighting, pulsating power supply technology can work continuously

Standard cross-type magnetic yoke probe with four-legged rollers can continuously multi-directional labor-saving flaw detection, electromagnetic yoke built-in adjustable luminance and white fluorescent optional LED lighting, pulsating power supply technology can work continuously

18V/6400mAh lithium battery, continuous work > 4 hours, 3.5-inch smart color screen display status, fluorescent/white light dual-use lighting (illumination > 1000lx), electromagnetic yoke pole distance 75-180mm/lifting force ≥ 45N, 0.8kg portable body (100 × 200 × 35mm)

Working gap time 1 second on 2 seconds off, battery use time more than 6 hours, charging time 8~ 15h, rechargeable battery MF12-7.2H, charging power supply 220V 50Hz

Load cycle: ≤ 30%, control mode: manual, sensitivity: A1 type test piece (15/50) shows clearly, electrode spacing: 0~270mm, coil inner diameter: 250 * 250mm, longitudinal magnetization: 0~8000AT, circumferential magnetization: 0~500A.

Battery and yoke integration can be replaced independently, intelligent identification magnetization (contact workpiece automatic magnetization, leave stop), fluorescent white light can be switched and strong illumination, yoke spacing adjustable, probe foot adjustment is convenient, lifting force and sensitivity are not affected by electricity, full power continuous work for more than 5 hours